test

These trash shoots are made of heavy duty 30 x 4' tapered plastic. Hardware is bolted instead of pop riveted which results in a stronger and more durable product. Chutes are designed to be used with a one or two piece trash chute hopper. Set up can be done in minutes. Available: • One piece adapter plate (weight is 60 lbs.) • Two piece hopper with sling (weight is 160 lbs.) Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

This extra large (48 x 60 inches) tray is designed to fit our popular Four Wheel Trailer. It's engineered for fast, easy on/off attachment, and fabricated from heavy gauge steel. Also, it's available for four wheel trailer. It's weight is 165 lbs. Note: Four Wheel Trailer is sold separately. Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

Available by special order, this dumping hopper is made from heavy-duty steel construction. It features: • Grease fittings on pivot axles • Pivot points reinforced with steel plates for added strength • Heavy duty base with fork channels and skids • Dropped front for clean dumping • Five sizes: 1 yd., 1-1/2 yd., 2 yd., 3 yd., and 4 yd. Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

This heavy-duty, four-wheel trailer has a 30 x 60 inch bed, although larger custom beds are available. It's designed to be used individually or hooked with other four-wheel trailers. The mechanical brake makes contact with the front tires when the tongue is dropped. Towing capacity is 2,000 lbs. Available options: • 18 x 8.50 large tires (weight is 190 lbs.) • 400 x 8 flatbuster tires (weight is 248 lbs.) Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

Maximize your material handling needs with this pack horse. Ideal for use on or off the roof and for moving rolls of felt, insulation, pallets, and more. Its maximum weight capacity is 600 lbs. and large 18 X 8.5 tires are standard. Also available as a pack horse only (without utility wheels). This option weighs 120 lbs. Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

This steel-frame, two-wheel wheelbarrow features two 400 x 8 pneumatic tires with 1 inch bearings for maximum stability. It's weight is 75 lbs. A flatbuster tire is optional. Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

This heavy duty all-steel wheelbarrow has a 400 x 8 pneumatic tire with a 5/8 inch bearing. It's weight is 60 lbs. A flatbuster tire is optional. Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

With a lifting capacity of 300 lbs., this two-piece hand beam is an inexpensive and efficient means for transporting materials to the roof. It's light weight and easy to assemble. Also, load the large counter weight basket with cement blocks to support the two-piece hand beam and offset the weight of the hoisted materials. Note: Hoisting wheel, rope, and bucket are sold separately, and cement blocks are available at most building material stores. Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

This 12 inch hoisting wheel accommodates 3/4 inch rope. It's made of hard cast aluminum with solid steel frame. Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

Use these to conveniently transporting lightweight supplies to the roof. Both models use 3/4 rope with weight up to 10 lbs (rope is sold separately). Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

This is a 3/4 x 100' manila rope with safety hook. It is available with: • Large rope hook with spring latch • Small handline hook with safety latch Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

Manila rope in a 600 foot coil. It's available in the following sizes: • 1/2 (wt. 45 lbs) • 3/4 full coil (wt. 102 lbs) Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

Leister's UNIROOF 700 is a compact automatic welding machine suited to weld thermoplastic membranes (for example made of TPO, PVC, EVA, PIB and modified bitumen) on flat roofs up to approx. 500 sqm and slightly inclined roofs (inclination up to 30 Slope grad). It complements Leister's globally proven line of automatic roof welding machines. With the Leister Quality System (LQS) the important welding parameters (temperature, air volume and speed) are not only under control, but the welding quality is precisely documented.

• Monitored-Welding-Assistant for process reliability
• Welding quality documented thanks to LQS
• Standard nozzle ensures homogeneous weld seam
• Power management for constant welding process
• Welding recipes in the myLeister app

 

Leister's UNIROOF 300 is the ideal entry-level automatic roof welding machine for thermoplastic membranes made of TPO, PVC, EVA, PIB and modified bitumen. It's used on medium-sized, flat roofs up to approx. 500 sqm, parapets and as a supplement on large, flat roofs. This applies to residential construction, as well as roof sealing on larger industrial buildings. With the UNIROOF 300, welding close to the edge, up to 100 mm at and on parapet corners, is a breeze.

• Reliable roof welding machine with a digital display
• Excellent price-performance-ratio
• Homogeneous weld seam thanks to the standard nozzle
• Low-maintenance drive motor
• Compact and light at only 17 kg (37.5 lbs)

Roofers Mart is an authorized dealer of Leister parts and equipment. We have a Leister technician on staff to help you with repairs and answer your questions, and we maintain an inventory of several of the company's most popular roofing tools and robots. If we don't have what you want, we can order it for you directly from Leister.

Leister's UNIROOF 700 is a compact, automatic welding machine suited to weld thermoplastic membranes (for example made of TPO, PVC, EVA, PIB and modified bitumen) on flat roofs up to approx. 500 sqm and slightly inclined roofs (inclination up to 30 degrees). It complements Leister's globally proven line of automatic roof welding machines. With the Leister Quality System (LQS), the important welding parameters (temperature, air volume and speed) are not only under control, but the welding quality is precisely documented.

With the "LQS Roofing" service, reports with the welding data are then generated as PDF or CSV files via the myLeister app. You can access those reports at any time via the cloud, provided you have access to the Internet. Thanks to the tools like GPS integration, roofers can prove the quality of their work.

Roofers Mart is an authorized dealer of Leister parts and equipment. We have a Leister technician on staff to help you with repairs and answer your questions, and we maintain an inventory of several of the company's most popular roofing tools and robots. If we don't have what you want, we can order it for you directly from Leister.

The Leister BITUMAT B2 offers a single-step, flameless welding of modified bitumen sheeting (SBS, APP). It requires only one user to weld seams efficiently, making it safer, more efficient and more economical. The suitable bitumen nozzle provides accurate weld seams that can only be guaranteed with hot air tools. And, thanks to its ergonomic design and well-placed guide, the BITUMAT B2 delivers the required welding power in just one use and at a constant speed.

Roofers Mart is an authorized dealer of Leister parts and equipment. We have a Leister technician on staff to help you with repairs and answer your questions, and we maintain an inventory of several of the company's most popular roofing tools and robots. If we don't have what you want, we can order it for you directly from Leister.