test

This fastener is designed to secure insulation to standard steel and wood. It can be used with several plates. Available in lengths from 1 5/8 to 8 inches.

OMG offers the CD-10 fastener specifically designed for securing insulation and membrane to structural concrete. The OMG CD-10 is a hammer-in, non-threaded fastener with a split bulb design that exerts pressure on hole walls for superior strength and hold power. It is available in lengths between 2-in and 12-in.

This hammer-in, non-threaded fastener is designed to secure insulation and single-ply membranes to structural concrete. Available in 2 through 12 inch lengths.

Designed to fit into existing drain leaders in re-roofing applications, this product is available with a clamping ring or TPO/PVC coating. Available in 3 and 4 inches with custom lengths available.

The ChemCurb System by Chem Link replaces old style metal pitch pans with versatile precast curb components, pourable sealant, and structural adhesive/sealant. No flashing or mechanical attachment is required, and installation is quick and easy. Designed for use on granulated modified bitumen, PVC, EPDM, PIB, TPO single ply, asphalt, and coal tar BUR. This system includes: • Polyester ChemCurb Cartons: 7.5" cartons, each containing four polyester chemcurbs. • 1-Part ChemCurb Kit: Each kit contains a set of round curbs, cartridges of M-1 Cubetainer adhesive, pouches of 1-Part Sealant, and a trowel. They are available in 5" and 7.5". • 5" Chemcurb Cartons: Each carton contains six complete polyester or urethane 5" chemcurbs. • 6" Chemcurb Straights Polyester: Each carton contains eight polyester chemcurbs. • 6" Chemcurb Corners Polyester: Each carton contains eight polyester corner chemcurbs. • 12" Chemcurb Straights Polyester: Each carton contains eight polyester 12" chemcurbs. • 1-Part Pourable Sealer Tubes: Twelve 28 oz. tubes per case. Available color is gray. • 1-Part Pourable Sealer 2-Liter Pouch: Four field packs per carton. 2-part filler. The material can be used in place of the F/S pourable sealer. • Structural Sealant: Sixteen 10.3 oz. tubes per case. Available colors are black, gray, and white. • Structural Sealant: Twenty-four 10.3 oz. tubes per case. Available color is bronze. • 3" Round Grey Minicurbs: Ten curbs, eight 10.1 oz. cartridges, minicurb 1-part pourable sealer, and two 10.1 oz. cartridge of M1. • 9" Round Gray: Twenty-two Curbs, two pouches of 1-part pourable sealer, and two 10.1 oz. cartridge of M1.

Karnak manufactures a complete line of coatings, cements, and sealants for roofing and waterproofing. Karnak is the leading manufacturer of Energy Star labeled coatings. Products are rated for fire resistance and wind uplift by UL and FM, and are certified by UL to comply with ASTM Specifications. The following are some of the products we carry: • #19 Ultra Flashing Tube • #19 1-gal Plastic Cement • #19 3-gal Plastic Cement • #19 3- gal Ultra Plastic Cement • #19 5-gal Plastic Cement • #66 5-gal Brush Grade Modified Cement • #66 5-gal Trowel Grade Modified Cement • #71 5-gal Roof Coating • #97 5-gal Aluminum Coating • #97 1-gal Aluminum Coating • #108 5-gal Asphalt Primer • #108 12 oz. Spray Primer • #111 5-gal Quick Prime • #169 5-gal Non-Fibered Aluminum • #170 5-gal Tar Roof Cement • #220 5-gal Emulsion Coating • #229 5-gal Trowel Elastrometric • #229 3-gal Trowel Elastrometric • #229 1-gal Trowel Elastrometric • #229 5-gal Brush Elastrometric • #230 5-gal 2% Neo Trowel Grade • #298 5-gal Aluminum R • #502 3-gal Seam Sealer – Flex • #502 5-gal White Elasto Kote Finish • #502 5-gal Gray Elasto Kote Finish • #529 5-gal RW Renu White Acrylic Coating • Jiffy Mixer • Karna Flex Seam Sealing Caulk • 4 Resat Matt / 300' per Roll • 6 Resat Matt / 300' per Roll • 40 Resat Matt / 324' per Roll • 4 Cotton Membrane / 150' per Roll • 6 Cotton Membrane / 150' per Roll • 12 Cotton Membrane / 150' per Roll • 36 Cotton Membrane / 150' per Roll • 4 Fiberglass Membrane / 150' per Roll • 6 Fiberglass Membrane / 150' per Roll • 12 Fiberglass Membrane / 150' per Roll • 36 Fiberglass Membrane / 150' per Roll

This static bead adhesive spray rig is available through Amped Equipment (a division of Black Cat, Inc.). It's lightweight, easy-to-maneuver, and compatible with 15-gallon drums, jugs, or bag-in-the-box. Also, it's available with and without generator.

Use these hand rollers to double the surface area to hold more material! Rollers are 8 inches with a large 4 inch diameter. Since 1982, Rooftop Equipment has been increasing productivity, efficiency, and profitability. They offer more than 15 industry solution products to help roofers complete their jobs.

These patent pending rollers fit onto the rib of metal panels, eliminating overspray. There are seven standard profiles in addition to made-to-order custom profiles. These rollers are available in 8 and 14 inch lengths. Since 1982, Rooftop Equipment has been increasing productivity, efficiency, and profitability. They offer more than 15 industry solution products to help roofers complete their jobs.

This tank spreader is gravity-fed, uses disposable rollers, and features disposable or replaceable parts. Use super 40 inch spreader rollers to apply any pourable material such as low VOC adhesives and coatings from a tank. Since 1982, Rooftop Equipment has been increasing productivity, efficiency, and profitability. They offer more than 15 industry solution products to help roofers complete their jobs.

These replacement rollers are specifically for Better Spreaders and Tank Spreaders. They are available in Singlewide 14 inches, Doublewide 27 inches, and Super 40 inches. Since 1982, Rooftop Equipment has been increasing productivity, efficiency, and profitability. They offer more than 15 industry solution products to help roofers complete their jobs.

The Better Spreader is a doublewide 27 inch gravity-fed adhesive dispenser. It uses disposable rollers and features disposable or replaceable parts. Also, it applies adhesives directly from the can. Since 1982, Rooftop Equipment has been increasing productivity, efficiency, and profitability. They offer more than 15 industry solution products to help roofers complete their jobs.

This 30 gallon square bucket is on a cart with 10 x 1.75 tires. It's weight is 66 lbs. Mop carts are constructed of heavy gauge steel. A rolled rim reduces mop drag over top edge for longer lasting mops. Carts include a rolled mop cart rest, convenient mop handle holder and standard 6 inch wheels. Other cart options include: • Fenders, steel wheels, pneumatic tires • 10 X 1.75 or 10 X 3 tires Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

The bucket size for this product is 20 gallaons. It's shown with 10 x 1.75 tires, and it's weight is 40 lbs. Mop carts are constructed of heavy gauge steel. A rolled rim reduces mop drag over top edge for longer lasting mops. Carts include a rolled mop cart rest, convenient mop handle holder and standard 6 inch wheels. Other cart options include: • Fenders, steel wheels, pneumatic tires • 10 X 1.75 or 10 X 3 tires Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.

This product has a 18 gallon bucket and is shown with 10 x 1.75 tires. Its weight is 49 lbs. Mop carts are constructed of heavy gauge steel. A rolled rim reduces mop drag over top edge for longer lasting mops. Carts include a rolled mop cart rest, convenient mop handle holder and standard 6 inch wheels. Other cart options include: • Fenders, steel wheels, pneumatic tires • 10 X 1.75 or 10 X 3 tires Cleasby Manufacturing Inc., is a full line manufacturing facility and distributor of equipment and tools for the commercial and residential roofing industry. Whether it is single ply, cold process, built up roofing, or road maintenance equipment requirements, Cleasby Manufacturing offers a solution for single source equipment needs.